MWA經濟適實用純鎳鑄鐵焊條E406適用于鑄鐵的冷熱焊接

英國進口MWA純鎳鑄鐵焊條Mac Cast E406|ENi-CI|鑄鐵經濟型冷熱焊接

High quality general purpose nickel electrode designed for economical joining and surfacing of cast iron. Positive arc, fast build-up, easy slag detachability and fully machinable porosity free welds. May be used for hot or cold welding of cast irons and for surfacing and building up on malleable irons. It is suitable for joining mild steel to cast iron and is ideal for maintenance repair where sound welds are required.

高品質通用純鎳鑄鐵焊條，用于鑄鐵的經濟性連接和堆焊。正電弧，可快速堆焊，易于脫渣和完全可加工無氣孔焊縫金屬。可用于鑄鐵的冷熱焊接以及可鍛鑄鐵的堆焊。它適用于連接低碳鋼和鑄鐵，是需要良好焊縫情況下用于維護和修復的理想選擇。

Typical All Weld Metal Mechanical Properties（As Welded）

典型全焊縫金屬機械性能（焊態）：

Tensile Strength抗拉強度：         415 N/mm²

Elongation延伸率：                  15%

Hardness硬度：                     180 HB

Typical All Weld Metal Chemical Analysis (%)

典型全焊縫化學成分(%)

Sizes Available and Recommended Amperages

尺寸Φ/電流：

Current電流：DC(±)/AC(OCV: 50V min)

Related Specification參考標準：AWS A5.15 ENi-CI

Storage儲存：Electrodes should be stored in dry conditions. If allowed to become damp, the electrodes should be re-dried for TWO HOURS at 150°C before use. 焊條應儲存在干燥環境中。如果焊條受潮，應在150°C下重新干燥2小時后再使用。 

TIPS使用建議：Try to keep the electrode upright, closer to 90 degree. Keep short arc. Use short stringer bead. 盡可能保持焊條與工件為90°；短弧；采用短的線狀焊道。