經(jīng)在很多的加工行業(yè)中被使用，深受廠家的青睞。這種加工方式不但在制作產(chǎn)品的質(zhì)量或者速度等方面有很多的改進，在價格方面也會比其他的加工方式便宜很多。
Stainless steel plate laser cutting processing Beijing stainless steel plate cutting
At present, with the help of high power laser cutting machine, Beijing laser cutting can be made of various materials, then what material is added to the laser cutting of the industry?
1, carbon steel: modern laser cutting system can cut carbon steel the maximum thickness of up to 20MM, the use of the oxidation of carbon cutting mechanism for cutting of carbon steel can be
controlled in the range of satisfaction, the thin plate of its cutting can be narrow to about 0.1MM.
2, stainless steel: laser cutting on the use of stainless steel sheet as the main component of the manufacturing industry is an effective tool. In the strict control of the laser cutting process of the thermal
input measures, it can be limited to the cut edge heat affected zone becomes small, which is very effective to maintain the good corrosion resistance of this kind of material.
3, alloy steel: most alloy structural steel and alloy tool steel using laser cutting method to obtain good cutting quality. Even some high strength material, as long as the process parameters are controlled
properly, can be obtained flat, non stick slag cutting edge. However, for high-speed tool steel and hot die steel, laser cutting
Corrosion and slag formation.
4, aluminum alloy: aluminum cutting belongs to the melting and cutting mechanism, the use of auxiliary gas is mainly used to blow away from the cutting zone melting products, usually can get better
quality. For some aluminum alloys, it is to pay attention to the prevention of micro cracks in the surface of the cracks.
5, copper alloy: copper (copper) because the reflectivity is too high, basically can not use CO2 laser beam cutting. Brass (Tong Hejin) with high laser power, auxiliary gas using air or oxygen, can be a thin
plate for cutting.
6, titanium alloy: pure titanium can be very good coupling of the laser beam into the heat, auxiliary gas uses oxygen chemical reaction, cutting speed, but easy to produce oxide layer, not careful will also
cause a burn. For the sake of safety, the use of air as the auxiliary gas is better, in order to ensure the quality of cutting. Aircraft system
Titanium alloy laser cutting quality is better, although there will be a little sticky slag, but it is easy to remove.
7, nickel alloy: nickel based alloy, also known as super alloy, a lot of varieties. Most of which can be implemented in the oxidation of melting and cutting.
Metal thick plate laser cutting of the product quality is good, the speed is quick, this kind of processing method belongs to a kind of safety and environmental protection way, can provide a good working
environment for the staff. Compared with other processing methods, in many ways to improve. Laser cutting of metal plate
After a lot of processing industry is used, by the manufacturers of the favor. This process not only in the production of quality or speed, etc. there are a lot of improvements in the price will be much cheaper than other processing methods.
